Industrial Oil Mist Filter
Oil mist filters are highly effective in significantly reducing oil mist, water mist, fog or droplets from outside air or re-circulated air. In addition, they are useful downstream of DX or
coils and stream or mist-type humidifiers which allows saturated air to condense out.
Also used in turbine intake and spark arrestance etc.
Oil mist filters are constructed of a 16-Gauge galvanized steel frame
(standard); 18-Gauge type 304 stainless steel optional. There are drain holes equally
spaced on all four sides. Dimples are available upon request. 1", 2", 3", 4", or any size
or thickness can be made. Frames have welded construction; all seams on the air exit
side. Bale handles are available to make front load applications easier.
The media pack in a 2" filter is 16 layers of expanded metal, knitted mesh (to allow the
fluid to drain easily), and corrugated wire screen. Galvanized material is standard. Type
304 stainless steel is optional. 4" Frame with 2" media pack also available.
The mist eliminator is designed to operate at a face velocity of 500RPM. The velocity should not exceed 550 RPM.
Oil Mist Eliminator must be vertically installed to operate at peak
efficiency. Mounting hardware must be designed to support the mist eliminator with